View Issue Details
| ID | Project | Category | View Status | Date Submitted | Last Update |
|---|---|---|---|---|---|
| 0000199 | General | default | public | 2016-09-03 22:41 | 2017-05-12 13:16 |
| Reporter | DigitalMy | ||||
| Priority | normal | Severity | minor | Reproducibility | have not tried |
| Status | assigned | Resolution | open | ||
| Summary | 0000199: Programming of microcontrollers | ||||
| Description | There are several boards need to be set up for work. Main purpose is automation of life procedures (smart life). | ||||
| Tags | No tags attached. | ||||
| BuyTarget | |||||
|
|
Digispark links: http://digistump.com/package_digistump_index.json for Arduino IDE Description from http://digistump.com/wiki/digispark/tutorials/connecting tested successfully |
|
|
ESP8266 Tested ESP-01 USB adapter Needs jumper soldered from bottom to pin 1 (GND) and 5 (IO0) for programming For Arduino IDE http://arduino.esp8266.com/stable/package_esp8266com_index.json |
|
|
Tested ESP-12F module. VCC = 3.3V GND = GND EN -> Set HIGH level 3.3V (use 10K resistor) TXD0 -> to UART 3.3V RXD0 -> to UART 3.3V IO15 -> Set LOW level IO02 -> Set HIGH level for flash write IO00 set to LOW level |
|
|
Tested HC-22 ESP8266 serial WiFi module. It has smallest size: 13mm * 27mm * 2.5mm (very thin). Flash memory is 512KB. 3.3V levels |