0001342: Netgear ReadyNAS 1500 RNRX400E-100EUS

ID	Project	Category	View Status	Date Submitted	Last Update

0001342	Hardware for PC and servers	[All Projects] General	public	2021-03-02 00:37	2021-03-21 16:24

Reporter	DigitalMy
Priority	normal	Severity	minor	Reproducibility	have not tried
Status	assigned	Resolution	open

Summary	0001342: Netgear ReadyNAS 1500 RNRX400E-100EUS
Description	Set up hardware to maximum storage capacity. Got Netgear 1500 RNRX400E-100EUS https://www.netgear.com/support/product/RNRX443E Plan is to use 4pcs of 3TB HDD 3.5" or 4TB (test) in RAID 10 Default page must be https://192.168.168.168/admin admin netgear1
Tags	No tags attached.

DigitalMy 2021-03-02 00:37 administrator	netgear-readynas-1500-advanced-network-storage-model-rnrx400e-100eus.jpg (63,199 bytes) netgear-readynas-1500-advanced-network-storage-model-rnrx400e-100eus.jpg (63,199 bytes)

DigitalMy 2021-03-02 01:01 administrator ~0003995 Last edited: 2021-03-21 16:24 View 2 revisions	Motherboard is Netgear ADLCM0515 100314L00-600-G AX AMIBIOS 786Q FW X86-V.4.2.15 SN 2LL111RL006AA Power supply fan is Sunon MagLev KDE1204PKVX 1.6W 12V 40mm*20mm Failed to connect to device Tried to locate network interface with Wireshark: no response ... it does not send any packet , but network port LEDs are blinking fine On main board there is red LED near jumper always on. Have no manual of this motherboard to find jumper correct positions diagnostic startup menu "boot menu" navigation is fine (Reset button method) , but nothing like reset is going on... https://community.netgear.com/t5/Using-your-ReadyNAS-in-Business/ReadyNAS-2100-will-not-boot/td-p/1402870 had similar problem (unresolved), possible because of very old firmware in NAS Have user manual for model 2100 only Netgear_ReadyNAS_1500_RNRX4xxx_1.jpg (394,066 bytes) Netgear_ReadyNAS_1500_RNRX4xxx_2.jpg (579,047 bytes)