View Issue Details
| ID | Project | Category | View Status | Date Submitted | Last Update |
|---|---|---|---|---|---|
| 0000161 | 3D machine tool | build | public | 2015-06-10 23:21 | 2016-06-30 22:28 |
| Reporter | DigitalMy | ||||
| Priority | none | Severity | feature | Reproducibility | N/A |
| Status | checking | Resolution | open | ||
| Summary | 0000161: M3sto open frame 3D printer steel with build volume 210x300x200mm: frame changes | ||||
| Description | Based on RepRap p3steel ideas (especially version 4). 3D machine (printer, engraver) frame made of steel 3mm width by laser cut. Remake frame is going, starting from version 1. | ||||
| Additional Information | Designed for: Arduino Mega or Uno boards (with RAMPS or CNC shields), Nema17 stepper motors (from 30 up to 48mm length), Display smart controllers 2004 or 12864 (optional), LED power supply (350-400W) in metal case, mechanical endstop switches, 8mm smooth rods with LM8UU bearings for linear motion. | ||||
| Tags | No tags attached. | ||||
|
|
v1: minor changes of p3steel distance between Y-axis smooth rod centers is 170mm |
|
|
v2: changed F718S : less in size to fit motor Y space, from inner corner to center screw is 40mm both sides, total length 53.6mm changed F706S : idler Y shaft to be on the same level as motor shaft (the same level is 5 mm above baseline) changed F701S : width for idlers and motors to be 12mm, the same as X axle changed F715S : x-axis carriage mounting holes for hotend made on vertical center (44mm) , added bearing holder aperture to F713S (steel belt holder) , made total height 88mm, width 64mm changed F726S : less width, more height |
|
|
v3: changed F702S : mounting holes for cooler fan added, left only vertical board mounting holes (to fit display 300mm wire) changed F708S : to hold tight linear motion smooth rod Y changed F705S : added aperture for F716S (changed to spacer 12mm) changed F716S : separator for Y motor mounting (12mm) changed F721S : reduced weight , removed 3-point leveling changed F704S : moved endstop changeable limit screw aperture to inside changed F700S : moved spool holder aperture farther from side to center (now can mount front or back), made motor wire aperture bigger changed F715S : removed plastic tension tie aperture, fixed shape and sizing , set distance between X rod centers to be 46mm exactly, removed endstop connector removed F716S : will be another X endstop limit screw holder position removed F722S : will be 4 point bed leveling only changed F702S and F700S : mover vertical aperture (first lock) upper, gave space for F704S plate support lock, reduced quantity of F720S to 2pcs |
|
|
v4: changed F700S : separated display frame from main frame, set 160mm between its mounting (roll holders), keep distance between Z-axis leadscrew 330mm, moved sides (F702S) wider, to Z-motors, 280mm between centers, added endstop mounting on the left side changed F701S : made width 300mm (280 between frame-link lock screw centers) added F728S : for 12864 display, 172mm width, 90mm height added F729S : for 2004 display, 172mm width, 65mm height changed F704S : removed endstop nut, removed extra size and aperture, to fit moved F702S, total width 60mm, keep level 50-53mm, extended aperture plus 3 mm on internal side for sliding on assembling changed F714S : set nozzle center to 15mm from X-carriage surface (Z-axis is 6mm from front surface) changed F727S : made it one part holder changed F713S : changed it to hold bearings and belt changed F702S : added mounting - standard plug (27.2mm) - to horizontal motor holder plate (F704S) on level 50mm-53mm, added extruder motor mount, moved main board, power supply and fan apertures up changed F718S : added endstop mounting aperture chandes F709S : from simple roll axle holder to multifunctional (display controller and roll axle and extruder motor) holder with additional link to changed F703S removed F707S modified F710S and F711S : set height to 79mm (76mm before top) added F712T : top of x-carriage with T-screw nut aperture added F730S : 30mm fan holder for hotend, with link to F727F tested build volume (with aluminium standard "MK3" heated bed 314*214, surface located 17-18mm above carriage): single nozzle (E3D v6) X-Y-Z 210-300-200 mm dual nozzle (E3D v6) X-Y-Z 200-300-200 mm and extra 2mm safety gap each side after build volume exists... |
|
|
v5: changed article naming, start from F705A -> change the letter in the end for new parts assign article F705A (for "main central" front F700S joined with F728S) changed F705A: removed aperture for RAMPS button, left only 128*64 display aperture, added power supply aperture to the bottom, socket+switch expected on the right, F705A: is the main central frame part changed F710S and F711S: added aperture for M3 nut on both Z-carriage for X-axis smooth rods fastening , joined them into one part F705F "z-carriage front" F705F: set total width 390mm, smooth rod centers 364mm, leadscrew centers 330mm. changed F703S: extended aperture for PC4-M6 fitting (D=12.0mm), moved smooth rod latch to front, re-adjusted bearing aperture D=14mm, made mainboard holder aperture, joined two sides into F705C top cover, keep leadscrew interval 330mm F709S: changed shape, moved SD aperture close to display F702S: replaced with F702L and F702R, after that joined details of F702S with F709S (frame sides) to F705B (2pcs in set) F705B: moved extruder motor center to upper level 400mm, put arrow on side, added aperture for 80mm fan near motor one, moved side front to 20mm level, spool holder shaft made open. F701S: fixed inner corner aperture position, deprecated after that, renamed to frame front and rear (2pcs in set) to F705E F705E: moved y-carriage level to 70mm, rod center level to 64mm, target bed surface level is 80mm (cool) 90mm (hot), distance between y-carriage and frame bottom (F705D) is 17mm (belt space) F704S: joined sides into F705D F718S: set corner 70*70mm with fastener screw under smooth rods (53.5mm), after that deprecated and joined to F705D F705S: back to tube or nut spacers, removed extra aperture, after that deprecated and added aperture to F705D "frame bottom", the same for F706S, F705D: changed shape: width 390mm, length 441mm, added wiring gap near side, added Y-rod clamp bolt aperture (instead of F708S function) F714S: changed shape F730D: added 40mm fan holder frame for F727C F727C: added double hotend fastener with aperture for F730D F721S: transformed to F705G Y-carriage F705J: added part, for M5 nut on Z-carriage. This will be option over standard T-leadscrew aperture. F705K: added part, replacing F726S changed F715S : made distance between bearing centers bigger = 62mm, added Nema17 aperture in the middle, total height 77mm, width 64mm renamed to F705N, 2pcs in X-carriage, changed F705N: motor center set 31mm from bottom F705H added: replaced F712T, linear nuts holder for Z, total length 360mm F705I added: replaced F717S, X-axis rods holder, belt aperture 2mm*6mm, h=82mm above F705H (total 85mm), connecting screw to F705F centers at levels 22mm and 60mm, connecting teeth share levels with rods: 14mm and 76mm teeth are 3.0mm*5.8mm / 3.2mm*6.2mm aperture F705L added: bearing holder for Z-carriage |
|
|
M3sto_frame_v4.zip (882,668 bytes) |