View Issue Details
| ID | Project | Category | View Status | Date Submitted | Last Update |
|---|---|---|---|---|---|
| 0000194 | 3D machine tool | build | public | 2016-08-09 09:51 | 2016-08-20 03:14 |
| Reporter | DigitalMy | ||||
| Priority | normal | Severity | feature | Reproducibility | N/A |
| Status | assigned | Resolution | open | ||
| Summary | 0000194: Design and produce shield for 3D printer with Raspberry Pi 3 | ||||
| Description | Main featues: 1. The size of RPi3 85mm * 56mm 2. Connect directly to PRi3 40-pin GPIO port 3. Gives power +5V to RPi3, up to 2.5A 4. Has 6 slots for stepper drivers Pololu-type (2row*3pcs) out: 3pcs for axis, 3pcs for extruders = 18GPIO 5. Has 12V to 24V DC power input support - 2-pin connector 6. Has 3 heater (high current) power outs - 2-pin connector = 3GPIO 7. Has 3 fan out power ports 12V - 2-pin connector = 3GPIO 6. Has 3 endstop inputs - 3-pin connector = 3GPIO 8. Has 3 temperature sensor inputs - 2-pin connector = 3GPIO 9. Has 6 outs for stepper motors - 4-pin connector 10. I2C bus - 4-pin connector = 2GPIO* Total: 30 + 2* GPIO (need I2C extender) The name: "PIPS" = Pi Printer Shield | ||||
| Tags | No tags attached. | ||||
|
|
RPi3 draw up to 2.5A at 5V, PIMS provides that in advance Size of "PIPS" PCB is 85mm*56mm, with mounting holes 58*49mm. Mounting hole center is 3.5mm from side, diameter is 3mm. Pololu stepper driver connectors (6pcs) will support: THB6128, TMC2100, DRV8825, A4988 |
|
|
Project list (with RPi 3D): piPrint - https://github.com/iandouglas96/piPrint ibox nano - http://files.iboxprinters.com printpi - https://github.com/Wallacoloo/printipi zeroPi - https://github.com/ZeroPiProject/ZeroPi_Firmware RPI-CNC - http://wiki.protoneer.co.nz/Raspberry_Pi_CNC |