0007500: Clean idle speed control inside lower throttle

ID	Project	Category	View Status	Date Submitted	Last Update

0007500	vehicle service	Suzuki EVERY	public	2025-06-17 00:49	2025-07-27 01:50

Reporter	DigitalMy
Priority	normal	Severity	minor	Reproducibility	have not tried
Status	assigned	Resolution	open

Summary	0007500: Clean idle speed control inside lower throttle
Description	DA64V Idle speed control (ISC) module had overheated valve Number should be /18117-58J00 In lower chamber: /18117-67H20-000 /18117-67H21-000 became bad idle Suzuki Every
Tags	No tags attached.

DigitalMy 2025-06-17 01:33 administrator ~0014453 Last edited: 2025-07-27 00:04 View 5 revisions	Valve has 6-pin connector rectangular: purchased compatible valve 18117-58J00 /18117-67H10 =900RUR old : 3F 9ZM 2491 valve replaced with gasket ring adjusted "wrong" zero position on TPS (closed) visible throttle gap in closed position... idle run better, but still sometimes stall, and cannot start with closed throttle DA64V_throttle.png (27,875 bytes) DA64V_throttle.png (27,875 bytes)

DigitalMy 2025-07-27 01:50 administrator ~0014474	Connector 6-pin 2-row: each row = one coil middle contects to switched B+12V sides are from computer: negative ground contolled signals ISCV_pins.gif (10,648 bytes) ISCV_pins.gif (10,648 bytes)